How to easliy secure your 4 Door Unit

How to Secure Your 4-Door Unit

1. Identify the sides:
   You will see two end panels with dull sides. One is on the left handide 2 door cupboard and one is on the right hand side cupboard. These sides meet in the middle when putting the unit together.
2. Join the sides:
   Position the two panels side by side. On the inside, you will see pre-drilled holes - these are where you screw the two sides together.
3. Attach the top:
   Once the sides are secured, place the top in position. There are pre-drilled holes for screwing the top on. Use the screws provided. Ensure you have the same overhand on the left as you do on the right and that the back of the top is flush with the back of the unit with a front overhang. 
4. Touch-up and finishing:
   We have included touch-up paint if needed for minor scratches.
5. IMPORTANT - Levelling your unit:
   If the unit isn’t sitting straight on your floor, the doors may not align properly.
• Use the supplied wedges to level the unit.
• This is normal, especially on uneven floors such as carpet, tiles, or wood.
• It is easier to wedge the unit than for you to try to level your floor.
6. Need help?
• We’re just a phone call away to guide you through assembly.
• If needed, send us a photo and we can advise exactly where to place the wedges.